...

The theory

To store measurements for a longer time, it must be stored with a Retention Policy of desired length. It doesn’t make sense to store ALL data for the specified time: When Grafana shows values from a month in a graph, it physically cannot display data at 50 millisecond accuracy. Having a lot of data at very short intervals takes a lot of processing, bandwidth and disk space. So you must think about downsampling the data as well.

...

The ID service may have already added Continuous Queries and Retention Policies that meet your needs. Check the existing queries with the influx prompt:

> use oneportal
Using database oneportal

> show continuous queries
name: _internal
name query
---- -----

name: oneportal
name                                         query
----                                         -----
openid_api_requests_hourly                   CREATE CONTINUOUS QUERY openid_api_requests_hourly ON oneportal BEGIN SELECT count(auth_header_exists) INTO oneportal.one_year.openid_api_requests_hourly FROM oneportal.one_day.openid_api_request GROUP BY time(1h), path, method END
openid_api_requests_daily                    CREATE CONTINUOUS QUERY openid_api_requests_daily ON oneportal BEGIN SELECT sum(count) INTO oneportal.five_years.openid_api_requests_daily FROM oneportal.one_year.openid_api_requests_hourly GROUP BY time(1d), path, method END
mgmt_api_requests_hourly                     CREATE CONTINUOUS QUERY mgmt_api_requests_hourly ON oneportal BEGIN SELECT count(auth_header_exists) INTO oneportal.one_year.mgmt_api_requests_hourly FROM oneportal.one_day.mgmt_api_request GROUP BY time(1h), path, method, api_client_id, oauth2_client_id END
mgmt_api_requests_daily                      CREATE CONTINUOUS QUERY mgmt_api_requests_daily ON oneportal BEGIN SELECT sum(count) INTO oneportal.five_years.mgmt_api_requests_daily FROM oneportal.one_year.mgmt_api_requests_hourly GROUP BY time(1d), path, method, api_client_id, oauth2_client_id END
log_entry_hourly                             CREATE CONTINUOUS QUERY log_entry_hourly ON oneportal BEGIN SELECT count(event_id) INTO oneportal.one_year.log_entry_hourly FROM oneportal.one_day.log_entry GROUP BY time(1h), target_namespace_id, target_type, source, log_level, log_life END
log_entry_daily                              CREATE CONTINUOUS QUERY log_entry_daily ON oneportal BEGIN SELECT sum(count) INTO oneportal.five_years.log_entry_daily FROM oneportal.one_year.log_entry_hourly GROUP BY time(1d), target_namespace_id, target_type, source, log_level, log_life END
filterable_service_find_max_results_hourly   CREATE CONTINUOUS QUERY filterable_service_find_max_results_hourly ON oneportal BEGIN SELECT max(results) INTO oneportal.one_year.filterable_service_find_max_results_hourly FROM oneportal.one_day.filterable_service_find GROUP BY time(1h), service_class END
filterable_service_find_count_queries_hourly CREATE CONTINUOUS QUERY filterable_service_find_count_queries_hourly ON oneportal BEGIN SELECT count(results) INTO oneportal.one_year.filterable_service_find_count_queries_hourly FROM oneportal.one_day.filterable_service_find GROUP BY time(1h), service_class END

name: ruuvitag
name query
---- -----

...

This existing continuous query data can be used in Grafana with the following configuration:

...

Creating a

...

new RP and CQ

Let’s suppose there isn’t a CQ and RP that meet our requirements.

...

We need to have a Grafana display which shows Management API request counts by path, and we need to show data for the last 30 days. We need to be able to display data for quite a short interval, so let’s pick an interval of 5 minutes.

In summary:

• We need to store metrics data about Management API requests

• For 30 days

• With 5 minute interval accuracy

• This means we will have 30 * 24 * (60/5) = 8640 measurements per any stored tag combination. This is a reasonable amount of data to process.

What we already have

We can show a graph for the last 24 hours with the following Grafana Panel configuration:

...

> show retention policies
name       duration   shardGroupDuration replicaN default
----       --------   ------------------ -------- -------
autogen    0s         168h0m0s           1        false
five_years 43680h0m0s 168h0m0s           1        false
one_day    24h0m0s    1h0m0s             1        true
one_year   8736h0m0s  168h0m0s           1        false
one_month  720h0m0s   24h0m0s            1        false

Create a Continuous Query

Let’s create a CQ that collects everything usable from default mgmt_api_request data. We can find the tag and field names with commands like SELECT * FROM mgmt_api_request LIMIT 1.

CREATE CONTINUOUS QUERY "mgmt_api_requests_5min_for_1month" ON "oneportal" BEGIN SELECT count(auth_header_exists) AS "count_requests", sum("request_duration") AS "sum_request_duration", mean("request_duration") AS "mean_request_duration" INTO "one_month"."mgmt_api_requests" FROM "mgmt_api_request" GROUP BY time(5m), "path", "method", "api_client_id", "oauth2_client_id" END

We could have created a CQ that collects only the number of requests and groups them by path, but in anticipation of other needs, we collect more data and more tags.

Note:

• The data will be stored with RP one_month and name mgmt_api_requests

• It will have the following values:

  • count_requests: The number of requests made during 5 minutes. This is needed in our example.

  • sum_request_duration: A sum of the duration of request processing during 5 minutes. This can be used to display which requests are slowest to process and might be the causes of performance problems.

  • mean_request_duration: The mean duration of request processing during 5 minutes. This can be used to display how long requests take on average.

  • Tags path, method, api_client_id and oauth2_client_id. Of these path is needed for our example, others can be used in other graphs.

• The fields response_code, request_uri apparently cannot be used for grouping in a CQ, so they are not included.

Test the Continuous Query

Make a few Management API calls to add data.

curl -X GET "https://your-id-server.com/api/rest/v1/version"

Wait 5 minutes for the CQ to run. Then run the query:

> SELECT * FROM one_month.mgmt_api_requests
name: mgmt_api_requests
time                api_client_id    count_requests mean_request_duration method path                       sum_request_duration
----                -------------    -------------- --------------------- ------ ----                       --------------------
1608640500000000000 1248769513590337 1              14                    GET    user/{userId}/customfields 14
1608640500000000000 1248769513590337 2              48.5                  POST   user/{userId}/customfields 97
1608640500000000000                  5              2                     GET    example                    10
1608641100000000000                  6              1.8333333333333333    GET    version                    11

We see that 6 such requests were made, with an average processing time of 1.83 ms.

Update the Grafana panel

Make a duplicate of the original panel as a backup. Update the panel query configuration:

• In FROM use the one_month RP and the mgmt_api_requests name,

• change the SELECT parameters to use field count_requests and the function to sum() since we now need to add the counts up.

...

The equivalent query is: SELECT sum("count_requests") FROM "one_month"."mgmt_api_requests" WHERE $timeFilter GROUP BY time($__interval), "path" fill(0).

The graph now shows the expected correct values. You should change the Min interval to 5m to match the CQ, and to visualise that the data covers a 5 minute period.

...

More CQ examples

Number of Management API requests that ended if error code (>= 400):

CREATE CONTINUOUS QUERY mgmt_api_request_errors_5min_for_1month ON oneportal BEGIN SELECT count(auth_header_exists) AS count_requests INTO oneportal.one_month.mgmt_api_request_errors FROM oneportal.one_day.mgmt_api_request WHERE response_code >= 400 GROUP BY time(5m), api_client_id, oauth2_client_id, path END

Number of Management API requests that ended in successful code (200 to 399):

CREATE CONTINUOUS QUERY mgmt_api_request_successes_5min_for_1month ON oneportal BEGIN SELECT count(auth_header_exists) AS count_requests INTO oneportal.one_month.mgmt_api_request_successes FROM oneportal.one_day.mgmt_api_request WHERE response_code >= 200 AND response_code < 400 GROUP BY time(5m), api_client_id, oauth2_client_id, path END

Number of OpenID API requests, similar to number of Management API requests in the above example:

CREATE CONTINUOUS QUERY "openid_api_requests_5min_for_1month" ON "oneportal" BEGIN SELECT count(auth_header_exists) AS "count_requests" INTO "one_month"."openid_api_requests" FROM "openid_api_request" GROUP BY time(5m), "path", "method" END

Number of log entries:

CREATE CONTINUOUS QUERY "log_entries_5min_for_1month" ON "oneportal" BEGIN SELECT count("event_id") AS "count_entries" INTO "one_month"."log_entries" FROM "log_entry" GROUP BY time(5m), "source" END